Skocz do zawartości

Akcelaracja gtx960 nie działa na z170


PTRCIO
 Udostępnij

Rekomendowane odpowiedzi

Witam, posiadam płytę główną msi m7 gaming (z170) z zainstalowanym systemem sierra i niestety nie działa akceleracja 3D (zacinanie i wyświetlanie jedynie monitor 5mb pamięci). Przełożyłem dysk oraz kartę do płyty z97 i zadziałała "od kopa". Istnieje jakaś możliwość wymuszenia tej opcji?  #-o

AGDpfix uruchamia jedynie znak zakazu.  Znacznik true jest więc teoretycznie powinno odpalać.

Po zaznaczeniu injectnvidia wykrywa kartę ale bez akceleracji z liczbą 0 mb.

 

Z góry Dziękuję za pomoc. 

0:100  0:100  MemLog inited, TSC freq: 3504503940
0:100  0:000  MemLog was calibrated without ACPI PM Timer: ACPI I/O space is not enabled.
0:100  0:000  
0:100  0:000  Now is 24.3.2017,  15:46:8 (GMT)
0:100  0:000  Starting Clover revision: 3766 on American Megatrends EFI
0:100  0:000  Build with: [Args: -x64 -D DISABLE_LTO -t XCODE5 | -D DISABLE_LTO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE5 -n 9 | OS: 10.11.6 | XCODE: 7.3.1]
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x14,0x0)\USB(0x4,0x0)\HD(1,GPT,83494C87-BC4A-47DF-A8AA-19636E289CA3,0x28,0x64000) @8A428F18
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  === [ Get Smbios ] ========================================
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = <null string>
0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:100  0:000  Type 17 Index = 1
0:100  0:000  SmbiosTable.Type17->Speed = 2400MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1
0:100  0:000  SmbiosTable.Type17->Vendor = 859B
0:100  0:000  SmbiosTable.Type17->SerialNumber = 32A0A4FB
0:100  0:000  SmbiosTable.Type17->PartNumber = BLS8G4D240FSB.16FBD 
0:100  0:000  Type 17 Index = 2
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0MHz
0:100  0:000  SmbiosTable.Type17->Size = 0MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
0:100  0:000  SmbiosTable.Type17->Vendor = <null string>
0:100  0:000  SmbiosTable.Type17->SerialNumber = <null string>
0:100  0:000  SmbiosTable.Type17->PartNumber = <null string>
0:100  0:000  Type 17 Index = 3
0:100  0:000  SmbiosTable.Type17->Speed = 2400MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1
0:100  0:000  SmbiosTable.Type17->Vendor = 859B
0:100  0:000  SmbiosTable.Type17->SerialNumber = 32A0A4CC
0:100  0:000  SmbiosTable.Type17->PartNumber = BLS8G4D240FSB.16FBD 
0:100  0:000  Boot status=0
0:100  0:000  Running on: 'MS-7976' with board 'Z170A GAMING M7 (MS-7976)'
0:100  0:000  === [ GetCPUProperties ] ==================================
0:100  0:000  CPU Vendor = 756E6547 Model=506E3
0:100  0:000  got cores from CPUID_1 = 0
0:100  0:000  The CPU supported turbo
0:100  0:000  BrandString = Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz
0:100  0:000   TSC/CCC Information Leaf:
0:100  0:000    numerator     : 292
0:100  0:000    denominator   : 2
0:100  0:000   Calibrated ARTFrequency: 24003451
0:100  0:000  MSR 0xE2 before patch 1E000000
0:100  0:000  MSR 0xE4              00021814
0:100  0:000  MSR 0xCE              00080838_F1012300
0:100  0:000  non-usable FLEX_RATIO = F0000
0:100  0:000  corrected FLEX_RATIO = E0000
0:100  0:000  FSBFrequency=100MHz DMIvalue=100000kHz
0:100  0:000  Corrected FSBFrequency=100MHz
0:100  0:000  Vendor/Model/Stepping: 0x756E6547/0x5E/0x3
0:100  0:000  Family/ExtFamily: 0x6/0x0
0:100  0:000  MaxDiv/MinDiv: 35.0/8
0:100  0:000  Turbo: 36/37/38/39
0:100  0:000  Features: 0xBFEBFBFF
0:100  0:000  Threads: 4
0:100  0:000  Cores: 4
0:100  0:000  FSB: 100 MHz
0:100  0:000  CPU: 3500 MHz
0:100  0:000  TSC: 3500 MHz
0:100  0:000  PIS: 400 MHz
0:100  0:000  === [ GetDevices ] ========================================
0:100  0:000  PCI (00|00:00.00) : 8086 191F class=060000
0:100  0:000  PCI (00|00:01.00) : 8086 1901 class=060400
0:100  0:000  PCI (00|00:01.01) : 8086 1905 class=060400
0:100  0:000  PCI (00|02:00.00) : 10DE 1401 class=030000
0:100  0:000   - GFX: Model=Asus GeForce GTX 960 family 126 (Nvidia)
0:100  0:000  PCI (00|02:00.01) : 10DE 0FBA class=040300
0:100  0:000   - HDMI Audio: 
0:100  0:000  PCI (00|00:08.00) : 8086 1911 class=088000
0:100  0:000  PCI (00|00:14.00) : 8086 A12F class=0C0330
0:100  0:000  PCI (00|00:14.02) : 8086 A131 class=118000
0:100  0:000  PCI (00|00:16.00) : 8086 A13A class=078000
0:100  0:000  PCI (00|00:17.00) : 8086 A102 class=010601
0:100  0:000  PCI (00|00:1C.00) : 8086 A110 class=060400
0:100  0:000  PCI (00|03:00.00) : 1B21 1242 class=0C0330
0:100  0:000  PCI (00|00:1C.02) : 8086 A112 class=060400
0:100  0:000  PCI (00|04:00.00) : 1969 E0A1 class=020000
0:100  0:000   - LAN: 0 Vendor=Atheros
0:100  0:000  PCI (00|00:1F.00) : 8086 A145 class=060100
0:100  0:000  PCI (00|00:1F.02) : 8086 A121 class=058000
0:100  0:000  PCI (00|00:1F.03) : 8086 A170 class=040300
0:100  0:000  PCI (00|00:1F.04) : 8086 A123 class=0C0500
0:100  0:000  === [ GetDefaultSettings ] ================================
0:100  0:000  Clover load options size = 0 bytes
0:110  0:010  , Status=Success
0:110  0:000  EFI\CLOVER\config.plist loaded: Success
0:110  0:000  === [ GetListOfThemes ] ===================================
0:110  0:000  - [00]: embedded
0:110  0:000  - [00]: random
0:113  0:002  - [00]: tonymacx86
0:120  0:006  === [ GetEarlyUserSettings ] ==============================
0:120  0:000  timeout set to 3
0:120  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:120  0:000  KextsToPatch: 2 requested
0:120  0:000   - [00]: AppleAHCIPort (External icons patch) :: BinPatch :: data len: 8
0:120  0:000   - [01]: AppleUSBXHCIPCI (change 15 port limit to 26 in XHCI kext (100-Series-10.12)) :: BinPatch :: data len: 7
0:120  0:000  Default theme: tonymacx86
0:120  0:000  Hiding entries with string Windows
0:120  0:000  Hiding entries with string \EFI\BOOT\BOOTX64.EFI
0:120  0:000  === [ LoadDrivers ] =======================================
0:123  0:003  Loading FSInject-64.efi  status=Success
0:124  0:000  Loading OsxAptioFix2Drv-64.efi  status=Success
0:125  0:000  Loading OsxFatBinaryDrv-64.efi  status=Success
0:126  0:000  Loading HFSPlus.efi  status=Success
0:133  0:006   - driver needs connecting
0:133  0:000  1 drivers needs connecting ...
0:133  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
0:133  0:000  HFS+ driver loaded
0:133  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:292  0:159  Dump SMC keys from NVRAM:
0:351  0:058  === [ InitScreen ] ========================================
0:351  0:000  SetScreenResolution: 1920x1080 - not found!
0:351  0:000  SetMaxResolution: found best mode 2: 1280x1024
0:521  0:169  Video mode change to mode #2: Success
0:521  0:000   - set
0:521  0:000  Console modes reported: 4, available modes:
0:521  0:000   - [01]: 80x25
0:521  0:000   - [02]: 80x50
0:521  0:000   - [03]: 100x31
0:521  0:000   - [04]: 128x40 (current mode)
0:521  0:000  SetScreenResolution: 1280x1024 - already set
0:521  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x14,0x0)\USB(0x4,0x0)\HD(1,GPT,83494C87-BC4A-47DF-A8AA-19636E289CA3,0x28,0x64000)
0:522  0:001  === [ GetMacAddress ] =====================================
0:522  0:000  MAC address of LAN #0= 4C:CC:6A:69:DB:5F:
0:522  0:000  === [ ScanSPD ] ===========================================
0:522  0:000  SMBus device : 8086 A123 class=0C0500 status=Success
0:522  0:000  SMBus CmdReg: 0x3
0:522  0:000  Scanning SMBus [8086:A123], mmio: 0xDE32A004, ioport: 0xF000, hostc: 0x1
0:522  0:000  Slots to scan [8]...
0:522  0:000  SPD[1]: Got invalid type 0 @0x51. Will set page and retry.
0:523  0:000  SPD[1]: Type 12 @0x51
0:541  0:017  Unknown vendor bank=0x85 code=0x9B
0:541  0:000  DDR speed 2400MHz
0:541  0:000  Slot: 1 Type 26 8192MB 2400MHz Vendor=NoName PartNo=BLS8G4D240FSB.16FBD SerialNo=03020A000A040F0B
0:542  0:000  SPD[3]: Type 12 @0x53
0:559  0:017  Unknown vendor bank=0x85 code=0x9B
0:559  0:000  DDR speed 2400MHz
0:559  0:000  Slot: 3 Type 26 8192MB 2400MHz Vendor=NoName PartNo=BLS8G4D240FSB.16FBD SerialNo=03020A000A040C0C
0:560  0:000  === [ GetAcpiTablesList ] =================================
0:560  0:000  Get Acpi Tables List from RSDT:
0:560  0:000   - [00]: FACP  A M I  len=132
0:560  0:000   - [01]: APIC  A M I  len=132
0:560  0:000   - [02]: FPDT  A M I  len=68
0:560  0:000   - [03]: MCFG  A M I  len=60
0:560  0:000   - [04]: SSDT  SataTabl len=956
0:560  0:000   - [05]: FIDT  A M I len=156
0:560  0:000   - [06]: SSDT  SaSsdt  len=12633
0:560  0:000   - [07]: SSDT  PegSsdt len=9567
0:560  0:000   - [08]: HPET  SKL len=56
0:560  0:000   - [09]: SSDT  Ther_Rvp len=3557
0:560  0:000   - [10]: SSDT  xh_rvp08 len=2601
0:560  0:000   - [11]: UEFI  EDK2     len=66
0:560  0:000   - [12]: SSDT  CpuSsdt len=3806
0:560  0:000   - [13]: LPIT  SKL len=148
0:560  0:000   - [14]: WSMT  SKL len=40
0:560  0:000   - [15]: SSDT  sensrhub len=671
0:560  0:000   - [16]: SSDT  PtidDevc len=12290
0:560  0:000   - [17]: DBGP   len=52
0:560  0:000   - [18]: DBG2   len=84
0:560  0:000   - [19]: BGRT  A M I  len=56
0:560  0:000  Calibrated TSC frequency =3504503940 =3504MHz
0:560  0:000  === [ GetUserSettings ] ===================================
0:560  0:000  USB FixOwnership: no
0:560  0:000   - final DSDT Fix mask=00000000
0:560  0:000  Using smbios.plist at path: EFI\CLOVER\smbios.plist, Status=Not Found
0:561  0:000  === [ ScanVolumes ] =======================================
0:561  0:000  Found 7 volumes with blockIO
0:561  0:000  - [00]: Volume: PciRoot(0x0)\Pci(0x14,0x0)\USB(0x4,0x0)
0:562  0:001          USB volume
0:562  0:000  - [01]: Volume: PciRoot(0x0)\Pci(0x14,0x0)\USB(0x4,0x0)\HD(1,GPT,83494C87-BC4A-47DF-A8AA-19636E289CA3,0x28,0x64000)
0:563  0:001          Result of bootcode detection: bootable unknown (legacy)
0:563  0:000          USB volume
0:563  0:000          This is SelfVolume !!
0:563  0:000  - [02]: Volume: PciRoot(0x0)\Pci(0x14,0x0)\USB(0x4,0x0)\HD(2,GPT,0A362775-5919-42A4-AEB8-9904A5C6CBA4,0x64028,0x1D2BFB0)
0:564  0:001          USB volume
0:564  0:000  - [03]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x2,0xFFFF,0x0)
0:565  0:000  - [04]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x2,0xFFFF,0x0)\HD(1,GPT,3EFB2108-A806-4B2A-8E46-519C991D5D99,0x28,0x64000)
0:566  0:000          Result of bootcode detection: bootable unknown (legacy)
0:573  0:007  - [05]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x2,0xFFFF,0x0)\HD(2,GPT,FA40A2B4-2624-4C30-8200-2E24AB3F27F7,0x64028,0xDDFAC40)
0:573  0:000  - [06]: Volume: PciRoot(0x0)\Pci(0x17,0x0)\Sata(0x2,0xFFFF,0x0)\HD(3,GPT,FD6AF843-68EE-4A84-B569-059A939D9CB4,0xDE5EC68,0x135F20)
0:574  0:000  === [ InitTheme ] =========================================
0:574  0:000  Using theme 'tonymacx86' (EFI\CLOVER\themes\tonymacx86)
0:575  0:000  Choosing theme tonymacx86
0:576  0:000  after NVRAM boot-args=dart=0 nv_disable=1
0:576  0:000  === [ AddCustomLegacy ] ===================================
0:576  0:000  Scanning legacy ...
0:576  0:000   0: 'Whole Disc Boot' (legacy) not legacy
0:576  0:000   1: 'EFI' (legacy) not legacy
0:576  0:000   2: 'SanDiskp' (legacy) not legacy
0:576  0:000   3: 'Whole Disc Boot' (legacy) not legacy
0:576  0:000   4: 'EFI' (legacy) not legacy
0:576  0:000   5: 'macOS' (legacy) not legacy
0:576  0:000   6: 'Recovery HD' (legacy) not legacy
0:576  0:000  === [ ScanLoader ] ========================================
0:576  0:000  - [01]: 'EFI'
0:619  0:043  - [02]: 'SanDiskp'
0:622  0:002          AddLoaderEntry for Volume Name=SanDiskp
0:628  0:005          Check if volume Is Hibernated:
0:628  0:000      Check sleep image 'by signature':
0:632  0:004      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found
0:632  0:000      using default sleep image name = \private\var\vm\sleepimage
0:636  0:004      sleepimage not found -> Not Found
0:637  0:000          hibernated: no - sign
0:647  0:010  - [04]: 'EFI'
0:736  0:088  - [05]: 'macOS'
0:738  0:001          AddLoaderEntry for Volume Name=macOS
0:739  0:001          Check if volume Is Hibernated:
0:739  0:000      Check sleep image 'by signature':
0:742  0:003      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Not Found
0:742  0:000      using default sleep image name = \private\var\vm\sleepimage
0:744  0:002      sleepimage not found -> Not Found
0:744  0:000          hibernated: no - sign
0:755  0:010  - [06]: 'Recovery HD'
0:756  0:000          AddLoaderEntry for Volume Name=Recovery HD
0:767  0:011  === [ AddCustomTool ] =====================================
0:767  0:000  found tool \EFI\CLOVER\tools\Shell64U.efi
0:767  0:000  Checking EFI partition Volume 1 for Clover
0:767  0:000   Found Clover
0:768  0:001  === [ FindDefaultEntry ] ==================================
0:768  0:000  === [ GetEfiBootDeviceFromNvram ] =========================
0:769  0:000  Default boot entry not found
0:769  0:000  DefaultIndex=-1 and MainMenu.EntryCount=9
0:864  0:095  Found Mouse device:
0:864  0:000  GUI ready
13:430  12:565  Boot option Boot0000 not found
13:430  0:000  === [ StartLoader ] =======================================
13:430  0:000  Finally: Bus=100128kHz CPU=3505MHz
13:430  0:000  Loading boot.efi  status=Success
13:472  0:041  GetOSVersion: 10.12 (16A323)
13:472  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS
13:472  0:000  Filtering KextPatches:
13:472  0:000   - [00]: AppleAHCIPort (External icons patch) :: BinPatch :: [OS: 10.12 | MatchOS: All | MatchBuild: All] ==> allowed
13:472  0:000   - [01]: AppleUSBXHCIPCI (change 15 port limit to 26 in XHCI kext (100-Series-10.12)) :: BinPatch :: [OS: 10.12 | MatchOS: All | MatchBuild: All] ==> allowed
13:472  0:000  === [ PatchSmbios ] =======================================
13:472  0:000  insert table 9 for dev 0:0
13:472  0:000  insert table 9 for dev 0:1
13:472  0:000  insert table 9 for dev 0:0
13:473  0:000  Channels: 2
13:473  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
13:473  0:000  SMBIOS Type 17 Index = 0 => 0 0:
13:473  0:000  BANK0 DIMM0 EMPTY
13:473  0:000  SMBIOS Type 17 Index = 1 => 2 2:
13:473  0:000  BANK1 DIMM0 EMPTY
13:473  0:000  SMBIOS Type 17 Index = 2 => 1 1:
13:473  0:000  BANK0 DIMM1 2400MHz 8192MB
13:473  0:000  SMBIOS Type 17 Index = 3 => 3 3:
13:473  0:000  BANK1 DIMM1 2400MHz 8192MB
13:473  0:000  mTotalSystemMemory = 16384
13:473  0:000  NumberOfMemoryDevices = 4
13:473  0:000  Type20[0]->End = 0x7FFFFF, Type17[2] = 0x2000
13:473  0:000  Type20[1]->End = 0xFFFFFF, Type17[3] = 0x6000
13:473  0:000  Table 131 is present, CPUType=10
13:473  0:000  Change to: 605
13:473  0:000  === [ PatchACPI ] =========================================
13:473  0:000  RSDT 0x8EF87028
13:473  0:000  FADT from RSDT: 0x8EF87178
13:473  0:000  XSDT 0x8EF870A0
13:473  0:000  FADT from XSDT: 0x8EFADDB0
13:473  0:000  Xsdt reallocation done
13:473  0:000  old FADT length=114
13:473  0:000  Apply DsdtFixMask=0x00000000 old way
13:473  0:000     drop _DSM mask=0x0000
13:473  0:000  === [ FixBiosDsdt ] =======================================
13:473  0:000  VideoCard devID=0x140110DE
13:473  0:000  DisplayADR1[0] = 0x10001, DisplayADR2[0] = 0x0
13:473  0:000  USBADR[0] = 0x140000 and PCIe = 0xFFFE
13:473  0:000  USBADR[1] = 0x1C0000 and PCIe = 0x0
13:486  0:012  Audio HDA (addr:0x1F0003) setting specified layout-id=1 (0x1)
13:486  0:000  first CPU found at A3F5 offset A3F8
13:486  0:000  score candidate at A3F1
13:486  0:000  score inserted in acpi_cpu_score _PR_
13:486  0:000  Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_
13:487  0:000  Found PCIROOTUID = 0
13:487  0:000  === [ ACPIDropTables ] ====================================
13:487  0:000  === [ PatchAllSSDT ] ======================================
13:487  0:000  Patch table: SSDT  SataTabl
13:487  0:000   SSDT len = 0x3BC
13:487  0:000  Patch table: SSDT  SaSsdt 
13:487  0:000   SSDT len = 0x3159
13:487  0:000  Patch table: SSDT  PegSsdt
13:487  0:000   SSDT len = 0x255F
13:487  0:000  Patch table: SSDT  Ther_Rvp
13:487  0:000   SSDT len = 0xDE5
13:487  0:000  Patch table: SSDT  xh_rvp08
13:487  0:000   SSDT len = 0xA29
13:487  0:000  Patch table: SSDT  CpuSsdt
13:487  0:000   SSDT len = 0xEDE
13:487  0:000  Patch table: SSDT  sensrhub
13:487  0:000   SSDT len = 0x29F
13:487  0:000  Patch table: SSDT  PtidDevc
13:487  0:000   SSDT len = 0x3002
13:487  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
13:487  0:000   Xsdt has tables count=20
13:487  0:000  corrected XSDT length=196
13:487  0:000  CPUBase=0 and ApicCPUBase=1 ApicCPUNum=1
13:487  0:000  === [ RestSetupOSX ] ======================================
13:487  0:000  EdidDiscovered size=0
13:487  0:000  NVidia GFX injection not set
13:487  0:000   RCBA disabled; cannot use it
13:487  0:000  HDA Controller [8086:A170] :: PciRoot(0x0)\Pci(0x1F,0x3) => setting specified layout-id=1 (0x1)
13:487  0:000  stringlength = 552
13:487  0:000  CurrentMode: Width=1280 Height=1024
13:487  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 89F43F98
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 89F43F98
13:499  0:011  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
13:499  0:000    Extra kext: EFI\CLOVER\kexts\Other\AppleIntelE1000e.kext
13:513  0:014    Extra kext: EFI\CLOVER\kexts\Other\AtherosE2200Ethernet.kext
13:516  0:002    Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext
13:520  0:004    Extra kext: EFI\CLOVER\kexts\Other\RealtekRTL8111.kext
13:535  0:014    Extra kext: EFI\CLOVER\kexts\Other\USBInjectAll.kext
13:543  0:008  Custom boot is disabled
13:544  0:000  Closing log

Odnośnik do komentarza
Udostępnij na innych stronach

Nie działa Ci nvram przez co nie wskakuje flaga z driverów nvidi: nvda_drv=1. Albo odpalasz natywny (wywalasz emuvariableuefi) albo używasz protezy (tylko jeśli bios nie pozwala odpalić natywnego nvramu) w postaci emuvariableuefi + skrypty rc z Clovera.

 

Dziękuję! Emuvariableuefi załatwiło sprawę.

Odnośnik do komentarza
Udostępnij na innych stronach

Dołącz do dyskusji

Możesz dodać zawartość już teraz a zarejestrować się później. Jeśli posiadasz już konto, zaloguj się aby dodać zawartość za jego pomocą.

Gość
Dodaj odpowiedź do tematu...

×   Wklejono zawartość z formatowaniem.   Usuń formatowanie

  Dozwolonych jest tylko 75 emoji.

×   Odnośnik został automatycznie osadzony.   Przywróć wyświetlanie jako odnośnik

×   Przywrócono poprzednią zawartość.   Wyczyść edytor

×   Nie możesz bezpośrednio wkleić grafiki. Dodaj lub załącz grafiki z adresu URL.

Ładowanie
 Udostępnij

×
×
  • Dodaj nową pozycję...

Powiadomienie o plikach cookie

Korzystanie z tej witryny, wymaga zakceptowanie naszych warunków Warunki użytkowania.