Skocz do zawartości

Drugi etap instalacji


Marecki_
 Udostępnij

Rekomendowane odpowiedzi

  • Odpowiedzi 75
  • Dodano
  • Ostatniej odpowiedzi

Top użytkownicy w tym temacie

nadal to samo.... jak mam go z palca zainstalowac?

 


sprobuje zainstalowac sierre i zrobic update zobaczymy

 


Zainstalowałem Sierrę i błąd jest ten sam . Zastanawiam się czy coś nie siedzi czy to w pamięci Bios czy może w sektorze rozruchowym dysku . Jakiego Clovera bym nie instalował to wyskakuje informacja o tym ze Clover jest niezgodny z systemem i tak dalej sytuacja jak na HS

Odnośnik do komentarza
Udostępnij na innych stronach

Witam po swietach. 

Niestety po wyzerowaniu dysku problem jest ten sam. naprawde trace cierpliwosc

 

boot.log

0:100  0:100  MemLog inited, TSC freq: 2195018133
0:100  0:000  LegacyRegion2: Chipset/proc: 0x01048086
0:100  0:000   Next Generation Core processors (PAM 0x80-0x86)
0:100  0:000   Test PAM1=(0x41=90, 0x5a=00, 0x81=11, 0x91=00) at chipset 01048086
0:100  0:000  , Install = Success
0:112  0:012  VGA Pci.Hdr.Command=0 - not enabled
0:113  0:000  BiosVideoDriverBindingStart!
0:113  0:000  BiosVideoCheckForVbe
0:113  0:000  EdidOverride not found
0:125  0:012   Edid1+
0:125  0:000   found Detail Timing 1366x768
0:125  0:000  timing string after 0xFE:LG Display
  
0:125  0:000  timing string after 0xFE:LP156WH4-TLN2
0:137  0:012   Edid0+
0:137  0:000   found Detail Timing 1366x768
0:137  0:000  ... already present
0:137  0:000  timing string after 0xFE:LG Display
  
0:137  0:000  timing string after 0xFE:LP156WH4-TLN2
0:138  0:000     0 1024x768 attr=9B - ok, edid-, 1024x768, working, highest, pref=0
0:138  0:000     1 640x480 attr=9B - ok, edid-, 640x480, working
0:138  0:000     2 800x600 attr=9B - ok, edid-, 800x600, working
0:138  0:000  BV new mode: 0 1024x768
0:262  0:123   SetMode pref 0 (0) = Success
0:264  0:002  VGA Pci.Hdr.Command=0 - not enabled
0:431  0:166  VGA Pci.Hdr.Command=0 - not enabled
0:440  0:009  VGA Pci.Hdr.Command=0 - not enabled
1:784  1:343  VGA Pci.Hdr.Command=0 - not enabled
1:805  0:021  
1:805  0:000  Now is 1.1.2010,  0:1:20 (GMT)
1:805  0:000  Starting Clover revision: 4166 on CLOVER EFI
1:805  0:000  Build with: [Args: -mc --no-usb -D NO_GRUB_DRIVERS_EMBEDDED -D CHECK_FLAGS -t XCODE8 | -D DISABLE_USB_SUPPORT -D NO_GRUB_DRIVERS_EMBEDDED -D CHECK_FLAGS -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 5 | OS: 10.12.4 | XCODE: 8.3.2]
1:805  0:000  SelfDevicePath=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,631F36D2-6415-433D-A498-F9323F767851,0x28,0x64000) @9C016E18
1:805  0:000  SelfDirPath = \EFI\CLOVER
1:805  0:000  === [ Get Smbios ] ========================================
1:805  0:000  Type 16 Index = 0
1:805  0:000  Total Memory Slots Count = 2
1:805  0:000  Type 17 Index = 0
1:805  0:000  Table has error information, checking
1:805  0:000  Found memory information in table 18/0, type=0x3, operation=0x2 syndrome=0x0
1:805  0:000  ...memory OK
1:805  0:000  SmbiosTable.Type17->Speed = 1333MHz
1:805  0:000  SmbiosTable.Type17->Size = 4096MB
1:805  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 Bottom - Slot 1 (top)
1:805  0:000  SmbiosTable.Type17->Vendor = Samsung
1:805  0:000  SmbiosTable.Type17->SerialNumber = 0060D445
1:805  0:000  SmbiosTable.Type17->PartNumber = M471B5273DH0-CH9  
1:805  0:000  Type 17 Index = 1
1:805  0:000  Table has error information, checking
1:805  0:000  Found memory information in table 18/1, type=0x3, operation=0x2 syndrome=0x0
1:805  0:000  ...memory OK
1:805  0:000  SmbiosTable.Type17->Speed = 1333MHz
1:805  0:000  SmbiosTable.Type17->Size = 4096MB
1:805  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 Bottom - Slot 2 (under)
1:805  0:000  SmbiosTable.Type17->Vendor = 
1:805  0:000  SmbiosTable.Type17->SerialNumber = 00000000
1:805  0:000  SmbiosTable.Type17->PartNumber = H6451U67F9333G
1:805  0:000  Boot status=0
1:805  0:000  Running on: 'HP Pavilion dv6 Notebook PC' with board '17FA'
1:805  0:000  === [ GetCPUProperties ] ==================================
1:805  0:000  CPU Vendor = 756E6547 Model=206A7
1:805  0:000   The CPU supported SSE4.1
1:805  0:000   The CPU supported turbo
1:805  0:000  BrandString = Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz
1:805  0:000  MSR 0xE2 before patch 1E008404
1:805  0:000  MSR 0xE2 is locked, PM patches will be turned on
1:805  0:000  MSR 0xCE              00000800_60011600
1:805  0:000  MSR 0x1A0             00850089
1:805  0:000  MSR 0x1B0             00000000
1:805  0:000  FSBFrequency = 100 MHz, DMI FSBFrequency = 1333 MHz, Corrected FSBFrequency = 100 MHz
1:805  0:000  MaxDiv/MinDiv: 22.0/8
1:805  0:000  Turbo: 28/28/30/31
1:805  0:000  Features: 0xBFEBFBFF
1:805  0:000  Threads: 8
1:805  0:000  Cores: 4
1:805  0:000  FSB: 100 MHz
1:805  0:000  CPU: 2200 MHz
1:805  0:000  TSC: 2200 MHz
1:805  0:000  PIS: 400 MHz
1:805  0:000  ExternalClock: 100 MHz
1:805  0:000  === [ GetDevices ] ========================================
1:805  0:000  PCI (00|00:00.00) : 8086 0104 class=060000
1:805  0:000  PCI (00|00:01.00) : 8086 0101 class=060400
1:805  0:000  PCI (00|01:00.00) : 1002 6740 class=030000
1:805  0:000   - GFX: Model=AMD Radeon HD 6770M Series (ATI/AMD)
1:805  0:000   - RADEON_BIOS_0_SCRATCH = 0xFFFFFFFF
1:805  0:000  PCI (00|00:02.00) : 8086 0116 class=030000
1:805  0:000   - GFX: Model=Intel HD Graphics 3000 (Intel)
1:805  0:000  PCI (00|00:16.00) : 8086 1C3A class=078000
1:805  0:000  PCI (00|00:1A.00) : 8086 1C2D class=0C0320
1:806  0:000  PCI (00|00:1B.00) : 8086 1C20 class=040300
1:806  0:000  PCI (00|00:1C.00) : 8086 1C10 class=060400
1:806  0:000  PCI (00|07:00.00) : 10EC 8168 class=020000
1:806  0:000   - LAN: 0 Vendor=Realtek
1:806  0:000  PCI (00|00:1C.01) : 8086 1C12 class=060400
1:806  0:000  PCI (00|0D:00.00) : 168C 002B class=028000
1:806  0:000   - WIFI: Vendor=Atheros
1:806  0:000  PCI (00|00:1C.02) : 8086 1C14 class=060400
1:806  0:000  PCI (00|13:00.00) : 10EC 5209 class=FF0000
1:806  0:000  PCI (00|13:00.01) : 10EC 5209 class=080500
1:806  0:000  PCI (00|00:1C.03) : 8086 1C16 class=060400
1:806  0:000  PCI (00|19:00.00) : 1033 0194 class=0C0330
1:806  0:000  PCI (00|00:1D.00) : 8086 1C26 class=0C0320
1:806  0:000  PCI (00|00:1F.00) : 8086 1C49 class=060100
1:806  0:000  PCI (00|00:1F.02) : 8086 1C03 class=010601
1:806  0:000  PCI (00|00:1F.03) : 8086 1C22 class=0C0500
1:806  0:000  === [ GetDefaultSettings ] ================================
1:806  0:000  Clover load options size = 0 bytes
1:811  0:004  EFI\CLOVER\OEM\17FA\config.plist loaded: Success
1:811  0:000  === [ GetListOfThemes ] ===================================
1:811  0:000  - [00]: embedded
1:812  0:000  - [00]: random
1:812  0:000  - [00]: BGM
1:813  0:001  - [01]: newyear
1:815  0:001  - [02]: christmas
1:816  0:000  - [03]: metal
1:817  0:001  - [04]: bootcamp
1:819  0:001  === [ Found config plists ] ===============================
1:819  0:000  - config.plist
1:819  0:000  === [ GetEarlyUserSettings ] ==============================
1:819  0:000  timeout set to 10
1:819  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
1:819  0:000  ForceKextsToLoad: 1 requested
1:819  0:000   - [0]: System\Library\Extensions\IONetworkingFamily.kext
1:819  0:000  KextsToPatch: 2 requested
1:819  0:000   - [00]: IOAHCIBlockStorage (TRIMM Enabler) :: BinPatch :: data len: 10
1:819  0:000   - [01]: com.apple.driver.AppleIntelSNBGraphicsFB (HDMI-audio/VGA(0602) HD3000, 0x00010000, port 0306) :: BinPatch :: data len: 60
1:819  0:000   - patch disabled at config
1:819  0:000  Default theme: metal
1:820  0:000  === [ LoadDrivers ] =======================================
1:821  0:001  Loading FSInject-64.efi  status=Success
1:821  0:000  Loading apfs.efi  status=Success
1:823  0:001   - driver needs connecting
1:823  0:000  Loading HFSPlus-64.efi  status=Success
1:823  0:000   - driver needs connecting
1:823  0:000  Loading Ps2MouseDxe-64.efi  status=Success
1:823  0:000   - driver needs connecting
1:824  0:000  Loading UsbKbDxe-64.efi  status=Success
1:824  0:000   - driver needs connecting
1:824  0:000  Loading UsbMouseDxe-64.efi  status=Success
1:824  0:000   - driver needs connecting
1:824  0:000  Loading XhciDxe-64.efi  status=Success
1:825  0:000   - driver needs connecting
1:825  0:000  6 drivers needs connecting ...
1:825  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
1:825  0:000  HFS+ driver loaded
1:825  0:000  APFS driver loaded
1:837  0:011  VGA Pci.Hdr.Command=0 - not enabled
1:838  0:001  PciIo started
1:838  0:000  HcDevicePath found
1:838  0:000  attribute saved=600
1:838  0:000  attribute supports=8700 Status=Success
1:838  0:000  device enable status=Success
1:838  0:000  Create USB2HC
1:838  0:000  Xhc HCI version=96
1:838  0:000  PageSize = 1
1:838  0:000  XhcCreateUsb3Hc: Capability length 0x20
1:838  0:000  XhcCreateUsb3Hc: ExtCapRegBase 0x500
1:838  0:000  XhcCreateUsb3Hc: HcSParams1 0x4000820
1:838  0:000  XhcCreateUsb3Hc: HcSParams2 0x11
1:838  0:000  XhcCreateUsb3Hc: HcCParams 0x14042CB
1:838  0:000  XhcCreateUsb3Hc: DBOff 0x800
1:838  0:000  XhcCreateUsb3Hc: RTSOff 0x600
1:838  0:000  XhcCreateUsb3Hc: UsbLegSupOffset 0x0
1:838  0:000  XhcCreateUsb3Hc: DebugCapSupOffset 0xFFFFFFFF
1:860  0:021  XhcIntelQuirks
1:860  0:000  XhcResetHC
1:861  0:001  Initialize the schedule
1:861  0:000  Start the Host Controller
1:863  0:002  XhcDriverBindingStart: XHCI started for controller @ 9C39BE18
1:871  0:008  XhcReset: status Success
1:871  0:000  XhcGetState: current state 0
1:874  0:002  XhcSetState: status Success
1:874  0:000  XhcGetCapability: 4 ports, 64 bit capable=1
1:968  0:094  === [ InitScreen ] ========================================
1:968  0:000  Console modes reported: 4, available modes:
1:968  0:000   - [01]: 80x25
1:968  0:000   - [03]: 100x31
1:968  0:000   - [04]: 128x40 (current mode)
1:968  0:000  SetScreenResolution: 1024x768 - already set
1:968  0:000  reinit: self device path=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,631F36D2-6415-433D-A498-F9323F767851,0x28,0x64000)
1:969  0:001  Using embedded font: Success
1:970  0:000  === [ GetMacAddress ] =====================================
1:970  0:000  === [ ScanSPD ] ===========================================
1:970  0:000  XhcClearRootHubPortFeature for port 3 Feature=10: status Success
2:071  0:100  XhcUsbPortReset!
2:121  0:050  XhcSetRootHubPortFeature: status Success
2:171  0:050  XhcClearRootHubPortFeature for port 3 Feature=4: status Success
2:191  0:020  XhcClearRootHubPortFeature for port 3 Feature=14: status Success
2:299  0:107  SMBus device : 8086 1C22 class=0C0500 status=Success
2:299  0:000  SMBus CmdReg: 0x3
2:299  0:000  Scanning SMBus [8086:1C22], mmio: 0xC7506004, ioport: 0x6040, hostc: 0x1
2:299  0:000  Slots to scan [8]...
2:300  0:000  SPD[0]: Type 11 @0x50
2:319  0:019  DDR speed 1333MHz
2:319  0:000  Slot: 0 Type 24 4096MB 1333MHz Vendor=Samsung PartNo=M471B5273DH0-CH9 SerialNo=000006000D040405
2:320  0:000  SPD[2]: Type 11 @0x52
2:635  0:315  spd byte read taking too long for byte 52:221!
2:643  0:007  DDR speed 1333MHz
2:643  0:000  Slot: 2 Type 24 4096MB 1333MHz Vendor=Avant Technology PartNo=H6451U67F9333G SerialNo=0000000000000000
2:643  0:000  === [ GetAcpiTablesList ] =================================
2:643  0:000  Get Acpi Tables List from RSDT:
2:643  0:000   - [00]: FACP  SLIC-MPC len=244
2:643  0:000   - [01]: ASF!  INSYDE   len=165
2:643  0:000   - [02]: HPET  INSYDE   len=56
2:643  0:000   - [03]: APIC  INSYDE   len=140
2:643  0:000   - [04]: MCFG  INSYDE   len=60
2:643  0:000   - [05]: SLIC  SLIC-MPC len=374
2:643  0:000   - [06]: SSDT  INSYDE   len=1311
2:643  0:000   - [07]: BOOT  INSYDE   len=40
2:643  0:000   - [08]: ASPT  INSYDE   len=52
2:643  0:000   - [09]: SSDT  INSYDE   len=2382
2:643  0:000   - [10]: SSDT  INSYDE   len=2454
2:643  0:000   - [11]: SSDT  INSYDE   len=730
2:643  0:000   - [12]: SSDT  INSYDE   len=861
2:643  0:000   - [13]: SSDT  INSYDE   len=9377
2:643  0:000  Calibrated TSC Frequency = 2195018133 = 2195MHz
2:645  0:001  === [ GetUserSettings ] ===================================
2:645  0:000  USB FixOwnership: no
2:645  0:000   - final DSDT Fix mask=00000000
2:645  0:000  Use latest BiosVersion from config
2:645  0:000  BiosVersion: MBP81.88Z.0047.B26.1110311252
2:645  0:000  BiosReleaseDate: 10/31/11
2:645  0:000  ChassisType: 0x8
2:648  0:002  === [ ScanVolumes ] =======================================
2:648  0:000  Found 6 volumes with blockIO
2:648  0:000  - [00]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
2:648  0:000  - [01]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0x0,0x0)
2:648  0:000          Found optical drive
2:648  0:000  - [02]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,631F36D2-6415-433D-A498-F9323F767851,0x28,0x64000)
2:648  0:000          Result of bootcode detection: bootable unknown (legacy)
2:649  0:000          This is SelfVolume !!
2:649  0:000  - [03]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,B360CAFA-A9C9-47A3-89DE-764E7DAFCDBD,0x64028,0x145FC270)
2:649  0:000  - [04]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,D5FC98E5-DE0A-4B6F-82C7-4821A8DB98F0,0x14660298,0x135F20)
2:649  0:000  - [05]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,D31C8F99-9482-454A-8B2E-3B9CDEB79D4A,0x147961B8,0x951D0D0)
2:651  0:001  PutNvramPlistToRtVars: nvram.plist not found
2:651  0:000  === [ InitTheme ] =========================================
2:651  0:000  Using theme 'newyear' (EFI\CLOVER\themes\newyear)
2:651  0:000  OS main and drive as badge
2:653  0:001  Loading font from ThemeDir: Success
2:654  0:000  Choosing theme newyear
2:654  0:000  after NVRAM boot-args=-v kext-dev-mode=1
2:654  0:000  === [ Dump SMC keys from NVRAM ] ==========================
2:654  0:000  no AppleSMC protocol
2:654  0:000  === [ AddCustomEntries ] ==================================
2:654  0:000  Custom entry 0 skipped because it is disabled.
2:654  0:000  Custom entry 1 Title:"CD/DVD" FullTitle:"CD/DVD" Path:"\EFI\BOOT\BOOTX64.efi" Type:99 Flags:0x0 matching all volumes
2:654  0:000      Checking volume "EFI" (PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,631F36D2-6415-433D-A498-F9323F767851,0x28,0x64000)) ... skipped because media is ignored
2:654  0:000      Checking volume "Macintosh HD" (PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,B360CAFA-A9C9-47A3-89DE-764E7DAFCDBD,0x64028,0x145FC270)) ... skipped because media is ignored
2:654  0:000      Checking volume "Recovery HD" (PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,D5FC98E5-DE0A-4B6F-82C7-4821A8DB98F0,0x14660298,0x135F20)) ... skipped because media is ignored
2:654  0:000      Checking volume "Win" (PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,D31C8F99-9482-454A-8B2E-3B9CDEB79D4A,0x147961B8,0x951D0D0)) ... skipped because media is ignored
2:654  0:000  Custom entry 2 Title:"Windows" FullTitle:"Windows" Path:"\EFI\Microsoft\Boot\bootmgfw.efi" Options:"-s -h" Type:7 Flags:0x0 matching all volumes
2:654  0:000      Checking volume "EFI" (PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,631F36D2-6415-433D-A498-F9323F767851,0x28,0x64000)) ... skipped because path does not exist
2:654  0:000      Checking volume "Macintosh HD" (PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,B360CAFA-A9C9-47A3-89DE-764E7DAFCDBD,0x64028,0x145FC270)) ... skipped because path does not exist
2:654  0:000      Checking volume "Recovery HD" (PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,D5FC98E5-DE0A-4B6F-82C7-4821A8DB98F0,0x14660298,0x135F20)) ... skipped because path does not exist
2:654  0:000      Checking volume "Win" (PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,D31C8F99-9482-454A-8B2E-3B9CDEB79D4A,0x147961B8,0x951D0D0)) ... skipped because path does not exist
2:654  0:000  === [ ScanLoader ] ========================================
2:654  0:000  - [02]: 'EFI'
2:671  0:017  - [03]: 'Macintosh HD'
2:673  0:001          AddLoaderEntry for Volume Name=Macintosh HD
2:673  0:000      Not match custom entry 0: Path: not match, VolumeType: match, Type: not match
2:674  0:000      hibernated: set as never
2:674  0:000  not png, try icns
2:685  0:011  - [04]: 'Recovery HD'
2:686  0:000          AddLoaderEntry for Volume Name=Recovery HD
2:686  0:000      Not match custom entry 0: Path: not match, VolumeType: match, Type: not match
2:686  0:000  not png, try icns
2:694  0:007  - [05]: 'Win'
2:704  0:009  === [ AddCustomTool ] =====================================
2:704  0:000  found tool \EFI\CLOVER\tools\Shell64U.efi
2:704  0:000  Checking EFI partition Volume 2 for Clover
2:705  0:000   Found Clover
2:707  0:002  === [ GetEfiBootDeviceFromNvram ] =========================
2:707  0:000   - found entry 0. 'Boot macOS from Macintosh HD', Volume 'Macintosh HD', DevicePath 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,B360CAFA-A9C9-47A3-89DE-764E7DAFCDBD,0x64028,0x145FC270)\System\Library\CoreServices\boot.efii'
2:707  0:000  DefaultIndex=0 and MainMenu.EntryCount=8
3:091  0:384  GUI ready
6:755  3:664  BootVariable of the entry is empty
6:755  0:000  === [ StartLoader ] =======================================
6:755  0:000  Finally: ExternalClock=24MHz BusSpeed=99773kHz CPUFreq=2195MHz PIS: hw.busfrequency=96000000Hz
6:755  0:000  Loading boot.efi  status=Success
6:821  0:065  GetOSVersion: 10.12.6 (16G29)
6:821  0:000  CSR_CFG: CSR_ALLOW_UNTRUSTED_KEXTS | CSR_ALLOW_UNRESTRICTED_FS | CSR_ALLOW_TASK_FOR_PID | CSR_ALLOW_KERNEL_DEBUGGER | CSR_ALLOW_APPLE_INTERNAL | CSR_ALLOW_UNRESTRICTED_DTRACE | CSR_ALLOW_UNRESTRICTED_NVRAM | CSR_ALLOW_DEVICE_CONFIGURATION | CSR_ALLOW_ANY_RECOVERY_
6:821  0:000  Filtering KextPatches:
6:821  0:000   - [00]: IOAHCIBlockStorage (TRIMM Enabler) :: BinPatch :: [OS: 10.12.6 | MatchOS: All | MatchBuild: All] ==> allowed
6:821  0:000   - [01]: com.apple.driver.AppleIntelSNBGraphicsFB (HDMI-audio/VGA(0602) HD3000, 0x00010000, port 0306) :: BinPatch :: [OS: 10.12.6 | MatchOS: All | MatchBuild: All] ==> disabled by user
6:821  0:000  === [ PatchSmbios ] =======================================
6:821  0:000  insert table 9 for dev 0:0
6:821  0:000  insert table 9 for dev 0:0
6:821  0:000  insert table 9 for dev 0:0
6:821  0:000  Detected alternating SMBIOS channel banks
6:821  0:000  Channels: 2
6:821  0:000  Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
6:821  0:000  SMBIOS Type 17 Index = 0 => 0 0:
6:821  0:000  BANK 0 DIMM0 1333MHz 4096MB
6:821  0:000  SMBIOS Type 17 Index = 1 => 1 2:
6:821  0:000  BANK 1 DIMM0 1333MHz 4096MB
6:822  0:000  mTotalSystemMemory = 8192
6:822  0:000  NumberOfMemoryDevices = 2
6:822  0:000  Type20[0]->End = 0x3FFFFF, Type17[0] = 0x1000
6:822  0:000  Type20[1]->End = 0x7FFFFF, Type17[1] = 0x3000
6:822  0:000  Table 131 is present, CPUType=11
6:822  0:000  Change to: 703
6:822  0:000  === [ PatchACPI ] =========================================
6:822  0:000  RSDT 0x9CFFE0AC
6:822  0:000  FADT from RSDT: 0x9CFFC000
6:822  0:000  XSDT 0x9CFFE120
6:822  0:000  FADT from XSDT: 0x9CFFC000
6:822  0:000  Xsdt reallocation done
6:822  0:000  old FADT length=F4
6:822  0:000  DSDT found in Clover volume OEM folder: EFI\CLOVER\OEM\17FA\ACPI\patched\DSDT.aml
6:823  0:001  Output DSDT before patch to /EFI/CLOVER/ACPI/origin/DSDT-or.aml
6:837  0:014  Apply DsdtFixMask=0x00000000
6:837  0:000     drop _DSM mask=0x0000
6:837  0:000  === [ FixBiosDsdt ] =======================================
6:837  0:000  VideoCard devID=0x67401002
6:837  0:000  DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
6:837  0:000  VideoCard devID=0x1168086
6:837  0:000  DisplayADR1[1] = 0x20000, DisplayADR2[1] = 0xFFFE
6:837  0:000  USBADR[0] = 0x1A0000 and PCIe = 0xFFFE
6:837  0:000  Audio HDA (addr:0x1B0000) setting specified layout-id=20 (0x14)
6:837  0:000  Found Airport Atheros at 0x1C0001, 0x0, DeviceID=0x002B
6:837  0:000  USBADR[1] = 0x1C0003 and PCIe = 0x0
6:837  0:000  USBADR[2] = 0x1D0000 and PCIe = 0xFFFE
6:837  0:000  first CPU found at 7C11 offset 7C14
6:837  0:000  score candidate at 7C0D
6:837  0:000  score inserted in acpi_cpu_score _PR_
6:837  0:000  Found ACPI CPU: CPU0 | CPU1 | CPU2 | CPU3 | CPU4 | CPU5 | CPU6 | CPU7 , within the score: _PR_
6:838  0:000  Found PCIROOTUID = 0
6:847  0:008  === [ ACPIDropTables ] ====================================
6:847  0:000  === [ DropSSDT ] ==========================================
6:847  0:000  Drop tables from Xsdt, SIGN=SSDT TableID= Length=0
6:847  0:000   Xsdt has tables count=14
6:847  0:000   Table: SSDT  INSYDE    1311 dropped
6:847  0:000   Table: SSDT  INSYDE    2382 dropped
6:847  0:000   Table: SSDT  INSYDE    2454 dropped
6:847  0:000   Table: SSDT  INSYDE    730 dropped
6:847  0:000   Table: SSDT  INSYDE    861 dropped
6:847  0:000   Table: SSDT  INSYDE    9377 dropped
6:847  0:000  CPUBase=0 and ApicCPUBase=1 ApicCPUNum=8
6:847  0:000  Maximum control=0x16
6:847  0:000  Turbo control=0x1F
6:847  0:000  P-States: min 0x8, max 0x1F
6:847  0:000  SSDT with CPU P-States generated successfully
6:847  0:000  SSDT with CPU C-States generated successfully
6:847  0:000  === [ RestSetup macOS ] ===================================
6:847  0:000  EdidDiscovered size=128
6:847  0:000  ------- EDID Table
6:847  0:000  000  |  00  FF  FF  FF  FF  FF  FF  00  30  E4
6:847  0:000  010  |  8E  03  00  00  00  00  00  16  01  03
6:847  0:000  020  |  80  22  13  78  0A  01  A5  9C  59  5A
6:847  0:000  030  |  9B  26  18  50  54  00  00  00  01  01
6:847  0:000  040  |  01  01  01  01  01  01  01  01  01  01
6:847  0:000  050  |  01  01  01  01  58  1B  56  7E  50  00
6:847  0:000  060  |  0E  30  24  30  35  00  58  C2  10  00
6:847  0:000  070  |  00  19  00  00  00  00  00  00  00  00
6:847  0:000  080  |  00  00  00  00  00  00  00  00  00  00
6:847  0:000  090  |  00  00  00  FE  00  4C  47  20  44  69
6:847  0:000  100  |  73  70  6C  61  79  0A  20  20  00  00
6:847  0:000  110  |  00  FE  00  4C  50  31  35  36  57  48
6:847  0:000  120  |  34  2D  54  4C  4E  32  00  C6
6:847  0:000  ATI injection not set
6:847  0:000  Intel HD Graphics 3000 [8086:0116] :: PcieRoot(0x0)\Pci(0x2,0x0)
6:847  0:000    Found XGA Display - 4:3 :: Width=1024 Height=768
6:847  0:000    Beginning DualLink auto-detection
6:847  0:000    Low Resolution Display
6:847  0:000    AAPL00,DualLink: not used
6:847  0:000    FakeID Intel GFX: not set
6:847  0:000    snb-platform-id: not set
6:847  0:000    Beginning Intel GFX auto-detection with ACPI injection
6:847  0:000    Found FakeID Intel GFX = 0x01168086
6:847  0:000    Found snb-platform-id = 0x00010000
6:847  0:000  Intel GFX revision  = 0x9
6:847  0:000   setting specified layout-id=20 (0x14)
6:847  0:000  stringlength = 3888
6:848  0:000  CurrentMode: Width=1024 Height=768
6:848  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 9C016B18
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: 9C016B18
6:850  0:002  Use origin smbios table type 1 guid.
6:850  0:000  MSR 0x1B0   set to        00000000
6:851  0:001    Force kext: System\Library\Extensions\IONetworkingFamily.kext
6:856  0:004      Force PlugIn kext: System\Library\Extensions\IONetworkingFamily.kext\Contents\PlugIns\AppleBCM5701Ethernet.kext
6:862  0:006      Force PlugIn kext: System\Library\Extensions\IONetworkingFamily.kext\Contents\PlugIns\AppleIntel8254XEthernet.kext
6:865  0:003      Force PlugIn kext: System\Library\Extensions\IONetworkingFamily.kext\Contents\PlugIns\AppleIntelI210Ethernet.kext
6:868  0:002      Force PlugIn kext: System\Library\Extensions\IONetworkingFamily.kext\Contents\PlugIns\AppleVmxnet3Ethernet.kext
6:871  0:003      Force PlugIn kext: System\Library\Extensions\IONetworkingFamily.kext\Contents\PlugIns\AppleYukon2.kext
6:880  0:008      Force PlugIn kext: System\Library\Extensions\IONetworkingFamily.kext\Contents\PlugIns\Intel82574L.kext
6:884  0:004      Force PlugIn kext: System\Library\Extensions\IONetworkingFamily.kext\Contents\PlugIns\IOEthernetAVBController.kext
6:887  0:002      Force PlugIn kext: System\Library\Extensions\IONetworkingFamily.kext\Contents\PlugIns\mDNSOffloadUserClient.kext
6:890  0:002      Force PlugIn kext: System\Library\Extensions\IONetworkingFamily.kext\Contents\PlugIns\nvenet.kext
6:894  0:004  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\OEM\17FA\kexts\Other
6:894  0:000    Extra kext: EFI\CLOVER\OEM\17FA\kexts\Other\Lilu.kext
6:897  0:003    Extra kext: EFI\CLOVER\OEM\17FA\kexts\Other\AppleALC.kext
6:902  0:004      Extra PlugIn kext: EFI\CLOVER\OEM\17FA\kexts\Other\AppleALC.kext\Contents\PlugIns\PinConfigs.kext
7:051  0:148    Extra kext: EFI\CLOVER\OEM\17FA\kexts\Other\AtherosWiFiInjector.kext
7:056  0:005    Extra kext: EFI\CLOVER\OEM\17FA\kexts\Other\CPUSensors.kext
7:067  0:011    Extra kext: EFI\CLOVER\OEM\17FA\kexts\Other\FakeSMC.kext
7:084  0:017    Extra kext: EFI\CLOVER\OEM\17FA\kexts\Other\GenericUSBXHCI.kext
7:096  0:012    Extra kext: EFI\CLOVER\OEM\17FA\kexts\Other\GPUSensors.kext
7:110  0:014    Extra kext: EFI\CLOVER\OEM\17FA\kexts\Other\LPCSensors.kext
7:223  0:112    Extra kext: EFI\CLOVER\OEM\17FA\kexts\Other\VoodooPS2Controller.kext
7:237  0:013      Extra PlugIn kext: EFI\CLOVER\OEM\17FA\kexts\Other\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Keyboard.kext
7:259  0:022      Extra PlugIn kext: EFI\CLOVER\OEM\17FA\kexts\Other\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Mouse.kext
7:274  0:015      Extra PlugIn kext: EFI\CLOVER\OEM\17FA\kexts\Other\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Trackpad.kext
7:305  0:031  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\OEM\17FA\kexts\10.12
7:306  0:000    Extra kext: EFI\CLOVER\OEM\17FA\kexts\10.12\AppleALC.kext
7:323  0:016      Extra PlugIn kext: EFI\CLOVER\OEM\17FA\kexts\10.12\AppleALC.kext\Contents\PlugIns\PinConfigs.kext
7:711  0:388    Extra kext: EFI\CLOVER\OEM\17FA\kexts\10.12\AtherosWiFiInjector.kext
7:716  0:004    Extra kext: EFI\CLOVER\OEM\17FA\kexts\10.12\CPUSensors.kext
7:727  0:011    Extra kext: EFI\CLOVER\OEM\17FA\kexts\10.12\FakeSMC.kext
7:752  0:024    Extra kext: EFI\CLOVER\OEM\17FA\kexts\10.12\GenericUSBXHCI.kext
7:766  0:014    Extra kext: EFI\CLOVER\OEM\17FA\kexts\10.12\GPUSensors.kext
7:784  0:017    Extra kext: EFI\CLOVER\OEM\17FA\kexts\10.12\Lilu.kext
7:798  0:013    Extra kext: EFI\CLOVER\OEM\17FA\kexts\10.12\LPCSensors.kext
8:027  0:229    Extra kext: EFI\CLOVER\OEM\17FA\kexts\10.12\VoodooPS2Controller.kext
8:043  0:015      Extra PlugIn kext: EFI\CLOVER\OEM\17FA\kexts\10.12\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Keyboard.kext
8:108  0:065      Extra PlugIn kext: EFI\CLOVER\OEM\17FA\kexts\10.12\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Mouse.kext
8:121  0:012      Extra PlugIn kext: EFI\CLOVER\OEM\17FA\kexts\10.12\VoodooPS2Controller.kext\Contents\PlugIns\VoodooPS2Trackpad.kext
8:145  0:024    Extra kext: EFI\CLOVER\OEM\17FA\kexts\10.12\AppleALC.kext.dSYM
8:149  0:003    Extra kext: EFI\CLOVER\OEM\17FA\kexts\10.12\FakeSMC_ACPISensors.kext
8:181  0:032    Extra kext: EFI\CLOVER\OEM\17FA\kexts\10.12\FakeSMC_CPUSensors.kext
8:193  0:012    Extra kext: EFI\CLOVER\OEM\17FA\kexts\10.12\FakeSMC_GPUSensors.kext
8:212  0:018    Extra kext: EFI\CLOVER\OEM\17FA\kexts\10.12\FakeSMC_LPCSensors.kext
8:531  0:319    Extra kext: EFI\CLOVER\OEM\17FA\kexts\10.12\Lilu.kext.dSYM
8:535  0:004    Extra kext: EFI\CLOVER\OEM\17FA\kexts\10.12\RealtekRTL8111.kext
8:565  0:030  Custom boot screen not used because entry has unset use graphics

Odnośnik do komentarza
Udostępnij na innych stronach

Udalo sie zainstalowac Clovera na EFI ale zrobilem instalacje na drugim fizycznym dysku. Ten wlasciwy podpialem pod usb i instalacja poszla mimo bledu o niezgodnosci. 

 

Czy moze ktos zucic okiem na moj Config.plist ? 

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>ACPI</key>
	<dict>
		<key>DSDT</key>
		<dict>
			<key>Debug</key>
			<true/>
			<key>DropOEM_DSM</key>
			<false/>
			<key>Name</key>
			<string>DSDT.aml</string>
			<key>ReuseFFFF</key>
			<false/>
		</dict>
		<key>Fixes</key>
		<dict>
			<key>AddDTGP_0001</key>
			<true/>
			<key>FIX_RTC_20000</key>
			<true/>
			<key>FixHDA_8000</key>
			<true/>
			<key>FixHPET_0010</key>
			<true/>
			<key>NewWay_8000000</key>
			<true/>
		</dict>
		<key>SSDT</key>
		<dict>
			<key>DropOem</key>
			<true/>
			<key>Generate</key>
			<dict>
				<key>CStates</key>
				<true/>
				<key>PStates</key>
				<true/>
			</dict>
		</dict>
	</dict>
	<key>Boot</key>
	<dict>
		<key>Arguments</key>
		<string>-v kext-dev-mode=1</string>
		<key>DefaultVolume</key>
		<string></string>
		<key>Fast</key>
		<false/>
		<key>Legacy</key>
		<string>PBR</string>
		<key>Log</key>
		<false/>
		<key>NeverHibernate</key>
		<true/>
		<key>Secure</key>
		<false/>
		<key>Timeout</key>
		<integer>10</integer>
		<key>XMPDetection</key>
		<false/>
	</dict>
	<key>Devices</key>
	<dict>
		<key>Audio</key>
		<dict>
			<key>Inject</key>
			<string>20</string>
		</dict>
		<key>USB</key>
		<dict>
			<key>AddClockID</key>
			<false/>
			<key>FixOwnership</key>
			<false/>
			<key>Inject</key>
			<true/>
		</dict>
	</dict>
	<key>DisableDrivers</key>
	<array>
		<string>DataHubDxe</string>
		<string>EmuVariableUefi</string>
		<string>OsxAptioFix2Drv</string>
		<string>OsxLowMemFixDrv</string>
		<string>PartitionDxe</string>
		<string>#VBoxHfs</string>
	</array>
	<key>GUI</key>
	<dict>
		<key>Custom</key>
		<dict>
			<key>Entries</key>
			<array>
				<dict>
					<key>Disabled</key>
					<false/>
					<key>Hidden</key>
					<string>Always</string>
					<key>Path</key>
					<string>\EFI\BOOT\BOOTX64.efi</string>
					<key>VolumeType</key>
					<array>
						<string>External</string>
						<string>Internal</string>
					</array>
				</dict>
				<dict>
					<key>Disabled</key>
					<false/>
					<key>FullTitle</key>
					<string>CD/DVD</string>
					<key>Hidden</key>
					<false/>
					<key>Path</key>
					<string>\EFI\BOOT\BOOTX64.efi</string>
					<key>Title</key>
					<string>CD/DVD</string>
					<key>VolumeType</key>
					<string>Optical</string>
				</dict>
				<dict>
					<key>Disabled</key>
					<false/>
					<key>FullTitle</key>
					<string>Windows</string>
					<key>Hidden</key>
					<false/>
					<key>Path</key>
					<string>\EFI\Microsoft\Boot\bootmgfw.efi</string>
					<key>Title</key>
					<string>Windows</string>
				</dict>
			</array>
		</dict>
		<key>CustomIcons</key>
		<true/>
		<key>Language</key>
		<string>pl:30788</string>
		<key>Mouse</key>
		<dict>
			<key>Enabled</key>
			<true/>
			<key>Speed</key>
			<integer>2</integer>
		</dict>
		<key>Scan</key>
		<dict>
			<key>Entries</key>
			<true/>
			<key>Legacy</key>
			<false/>
			<key>Tool</key>
			<true/>
		</dict>
		<key>TextOnly</key>
		<false/>
		<key>Theme</key>
		<string>metal</string>
	</dict>
	<key>Graphics</key>
	<dict>
		<key>Inject</key>
		<dict>
			<key>ATI</key>
			<false/>
			<key>Intel</key>
			<true/>
			<key>NVidia</key>
			<false/>
		</dict>
		<key>PatchVBios</key>
		<false/>
	</dict>
	<key>KernelAndKextPatches</key>
	<dict>
		<key>AppleIntelCPUPM</key>
		<true/>
		<key>AppleRTC</key>
		<true/>
		<key>Debug</key>
		<false/>
		<key>ForceKextsToLoad</key>
		<array>
			<string>\System\Library\Extensions\IONetworkingFamily.kext</string>
		</array>
		<key>KernelCpu</key>
		<false/>
		<key>KernelLapic</key>
		<true/>
		<key>KextPatchesAllowed</key>
		<true/>
		<key>KextsToPatch</key>
		<array>
			<dict>
				<key>Comment</key>
				<string>TRIMM Enabler</string>
				<key>Find</key>
				<data>
				QVBQTEUgU1NEAA==
				</data>
				<key>Name</key>
				<string>IOAHCIBlockStorage</string>
				<key>Replace</key>
				<data>
				AAAAAAAAAAAAAA==
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>HDMI-audio/VGA(0602) HD3000, 0x00010000, port 0306</string>
				<key>Disabled</key>
				<true/>
				<key>Find</key>
				<data>
				AQIEABAHAAAQBwAABQMAAAIAAAAwAAAAAgUAAAAEAAAH
				AAAAAwQAAAAEAAAJAAAABAYAAAAEAAAJAAAA
				</data>
				<key>Name</key>
				<string>com.apple.driver.AppleIntelSNBGraphicsFB</string>
				<key>Replace</key>
				<data>
				AQIDABAHAAAQBwAABgIAAAABAAAJAAAABQMAAAIAAAAw
				AAAABAYAAAAIAAAJAAAAAAAAAAAAAAAAAAAA
				</data>
			</dict>
		</array>
	</dict>
	<key>SMBIOS</key>
	<dict>
		<key>BiosReleaseDate</key>
		<string>10/31/11</string>
		<key>BiosVendor</key>
		<string>Apple Inc.</string>
		<key>BiosVersion</key>
		<string>MBP81.88Z.0047.B26.1110311252</string>
		<key>Board-ID</key>
		<string>Mac-942459F5819B171B</string>
		<key>BoardManufacturer</key>
		<string>Apple Inc.</string>
		<key>BoardType</key>
		<integer>10</integer>
		<key>ChassisAssetTag</key>
		<string>MacBook-Aluminum</string>
		<key>ChassisManufacturer</key>
		<string>Apple Inc.</string>
		<key>ChassisType</key>
		<string>08</string>
		<key>Family</key>
		<string>MacBook Pro</string>
		<key>Manufacturer</key>
		<string>Apple Inc.</string>
		<key>Mobile</key>
		<true/>
		<key>ProductName</key>
		<string>MacBookPro8,3</string>
		<key>SerialNumber</key>
		<string>C02F8388DF92</string>
		<key>Trust</key>
		<false/>
		<key>Version</key>
		<string>1.0</string>
	</dict>
	<key>SystemParameters</key>
	<dict>
		<key>InjectKexts</key>
		<true/>
	</dict>
</dict>
</plist>

Dokladam jeszcze screen z kextami oraz folder OEM

post-125-0-94478200-1514911172_thumb.png

17FA.zip

 

Odnośnik do komentarza
Udostępnij na innych stronach

  • 2 miesiące temu...

Może mi ktoś pomóc z tym samym problemem restart i tego samego etapu instalacji? Mam to samo. Sformatowalem SSD i na nim zainstalowałem osx. Znaczy pierwszy etap bo drugi etap stoi. Mam laptopa Gigabyte P35W v4 z i7-5700hq SSD 128 HDD 1tb gtx97pm 6GB oraz 8GB ram. Dopiero zaczynam zabawę z osx i nie bardzo wiem jak rozwiązać problem.

Odnośnik do komentarza
Udostępnij na innych stronach

Dołącz do dyskusji

Możesz dodać zawartość już teraz a zarejestrować się później. Jeśli posiadasz już konto, zaloguj się aby dodać zawartość za jego pomocą.

Gość
Dodaj odpowiedź do tematu...

×   Wklejono zawartość z formatowaniem.   Usuń formatowanie

  Dozwolonych jest tylko 75 emoji.

×   Odnośnik został automatycznie osadzony.   Przywróć wyświetlanie jako odnośnik

×   Przywrócono poprzednią zawartość.   Wyczyść edytor

×   Nie możesz bezpośrednio wkleić grafiki. Dodaj lub załącz grafiki z adresu URL.

Ładowanie
 Udostępnij


×
×
  • Dodaj nową pozycję...

Powiadomienie o plikach cookie

Korzystanie z tej witryny, wymaga zakceptowanie naszych warunków Warunki użytkowania.